A selection of quotations from satisfied clients.

A selection of quotations from clients around the world. Although we have a lot more to show, we will put these and new ones as we get permission from the writers to do so.

Hi Mike and Scott,

What can one say?

Jesse has had a great week with the system – shut down most of a refinery after being asked if he could try a shot on a 4 valves in a 1”high pressure naptha line (this was in addition to some work we were being paid to do). Nominal wall is .220, he found a 0.010 patch on an exit bend, chief inspector called for crash stop – they love us and hate us at the same time – client is now putting together an RFQ for all of their small bore piping.

Regards,

Donald

A Very Satisfied Finnish Service Provider - Owner of Several Portable Flat Panel Systems

Hello again!

There is one image that shows just how good this new system is. That is the “Leak in a pipe” image. There was a suspicion about a leak in one pipe, but no one couldn't tell for sure where it could be found. No problemo! The great Vidisco Flatfox and a team of two experts (me and my father) rushed to the scene and with just 3 shots we were able to locate the hole! And it all took less 10 minutes! Could it have been done with conventional x-ray equipment...? HARDLY! At least it would have taken hours to do it.

Have a nice weekend!

Best regards,

Toni Kovanen

NDT Servitek Oy

Finland

Use of Iridium Source with Flat Panels

Hello Adar,

Yes, it's suprising me about that sensitivity of panel. I'd shoot with Ir-192 whose activity was 4 ci and exposing time was 9 s for process steam tube diameter OD 150 and 6,3 mm wall thickness. The tangent area and drilled test holes showed very well in image!

Other "real work" object was steam cooler in main steam manifold with wall thickness 25 mm, and the wall thicness of the ejector located inside of the manifold was 12 mm. So total wall thickness was 74 mm and shot with 30 ci activity and 50 s exposing time. The details of the inner ejector showed very well!

The shield on electronic area was 8 mm of lead.

I'll going back to the office in next week and I'll send the pictures for you from there because fastest e-mail connection.

Will be back soon

Best regards

Kari

City of Springdale - Police Department.

Dear Mr. Leisge,

We have been using the new Flat Fox 17 and FoX-Rayzor for several months now. We are very happy with the system. Thanks for telling me about the wireless kit. It is definitely worth the money. It makes the system very easy to use on and off the robot.

The picture quality produced by the digital imager is unbelievable. I know that the thin imagers are a big selling point for the company, but they need to advertise some images showing the benefits of the 16,384 gray levels. That is just as big an advantage of the new systems.

Hopefully more squads will receive grants in the near future that will allow them access to the new systems.

Thank you for your help in getting the system operational.

Sincerely

Springdale Police Department

Our IMAGE is your
best asset.

	Info request form
	Want to see how good our systems are?
	Go into our NDT or Security X-ray image pages to see samples of our work.
	Having problems seeing defects with your traditional X-ray? Apprehensive about taking the step to a Digital system?
	Send us an email describing your problem & we will help you to reach a decision that is best for your needs. In many cases we accept test pieces and send you images of the results we achieve.
	Our Clients
	A selection of quotations from satisfied clients.
	Links of interest
	Dog bomb detection The Crab -EOD and IED patches and badges
	X-ray images
	NDT images Homeland Security images